Flaviker Midi Stone-Effect Porcelain Tiles

Flaviker

Flaviker Midi Stone-Effect Porcelain Tiles

£221.69 £65.98/m²

Taxes included. Shipping calculated at checkout.

FLV-MID-POU-120X280-6-NATURE

ColourPoudre Poudre

Size

Finish

Free deliveryon orders over £750
Price matchguarantee
Expert adviceavailable

Product description

Midi is Flaviker’s reading of Mediterranean limestone, and the only collection in our Flaviker range offered in four different surfaces of the same stone — so a whole house can be run in one colour without a single wall repeating.

The six colours and four surfaces

The colour card runs warm to cool: Poudre is the powdery mid-grey the collection is built around; Beige and Ecru the two sand tones; Terre a deeper clay-brown; Ivoire a soft off-white; and Blanc the palest of the six.

Each colour is then cut four ways. Nature is the calm, even face — the one to use across a large floor. Melange is the same stone selected for movement, with more break and shadow in the graphic. Pointé is a fine hand-punched relief, and Cannellé a fluted, ribbed 120x280 slab for a feature wall or a bath panel. Pointé and Cannellé are made in Poudre, Beige and Ecru only.

How to use it

The trick with Midi is to run Nature underfoot and save Melange for the walls, so the floor stays quiet and the vertical surfaces carry the movement. Cannellé is a 120x280 slab only — treat it as joinery rather than tiling, and set out the flutes before you order so the ribs land where you want them.

Poudre, Beige and Ecru are the three colours that carry right through to 80x80 and on into the 20mm X20 outdoor sizes, so if the job runs from a kitchen floor out onto a terrace, start there. Terre, Ivoire and Blanc are wall and large-format colours.

Ordering & delivery

Sold by: the m² for standard sizes; 120x280 are sold per piece — each listing shows the m² a slab covers
Prices: inclusive of VAT and of delivery from the factory in Italy
Delivery: charged at the basket by the weight of your order — UK mainland kerbside pallet. Most 8.5mm porcelain runs about 19kg per m², 6mm slabs about 16.5kg per m², and 20mm X20 about 45kg per m²
Crated sizes: 120x280, 120x120 travel on a crate, A-frame or boarded pallet — an oversized pallet handling charge is added at the basket and confirmed before despatch
Lead time: 4–6 weeks, ordered from Italy. Non-stocked lines are made to order
Minimum order: one full box — part boxes cannot be supplied
Allow 10% over your measured area for cuts and future repairs

See it before you buy

No thumbnail does a 2.8-metre slab justice. Samples are available to order, and the Flaviker ranges are on display at our luxury interiors showroom in Newcastle-under-Lyme, Staffordshire, where you can see whole tiles rather than chips. Call 01782 617517 or email sales@homeofclay.co.uk for a quotation or to arrange a visit.

Key features

5 formats: 120x280, 120x120, 60x120, 80x80, 60x60
6 colours: Poudre, Beige, Ecru, Terre, Ivoire, Blanc
Finishes: Nature, Melange, Pointé and Cannellé graphics in Natural, R11 and X20 Outdoor R11
Thicknesses: 6 mm, 8.5 mm, 20 mm
Priced per box with the m² rate shown underneath
Prices include VAT and delivery from the factory in Italy
20 mm X20 outdoor grade with R11 grip
Large-format 6 mm slabs for seamless walls and floors

Technical information

Selected format

Poudre / 120 x 280cm · 6mm (Slab, sold per slab – 3.36m²) / Nature · Natural Rectified

Product code: FLV-MID-POU-120X280-6-NATURE
Colour: Poudre
Format: 120 x 280cm
Thickness: 6 mm
Sold by: Slab (price shown per slab, with the m² rate underneath)
Coverage per slab: 3.36 m²
Weight per slab: 55.1 kg
Packing: Crate / A-frame
Delivery: Oversized: travels on a crate, A-frame or boarded pallet — a delivery charge applies, calculated at checkout
Surface: Nature graphic, Natural
Edge: Rectified
Suitable for: Walls; residential floors; furniture and vanity surfaces

Collection specification

Collection: Midi: Mediterranean limestone in six colours and four surfaces — Nature, Melange, and the carved Pointé and Cannellé decors — from 60x60 up to a 120x280 slab, plus 20mm X20 for outdoors.
Manufacturer: Flaviker, a division of ABK Group Industrie Ceramiche, Fiorano Modenese (MO), Italy
Material: Full body porcelain
Standard: EN 14411 (ISO 13006) Annex G, Group BIa
Performance: Water absorption ≤ 0.5% (Group BIa porcelain)
Shade variation: V2: slight variation in shade and pattern
Thicknesses: 6 mm, 8.5 mm, 20 mm
Lead time: Typically 4–6 weeks from Italy
Delivery: Charged by order weight at checkout. 120x280 and 120x120 travel on a crate, A-frame or boarded pallet and carry an additional oversized pallet charge

Technical values are COEM’s published figures and are indicative. Please confirm anything specification-critical with us before ordering or laying.

Downloads

Flaviker Midi cataloguePDF – Flaviker Download
Flaviker Midi technical datasheetPDF – Flaviker Download

Delivery & returns

Lead time: typically 2–4 weeks, shipped from Italy.

Free delivery on orders of £750 and over. Under £750, pallet delivery is calculated at checkout.

Large-format tiles and slabs (90 × 90 cm and above): these travel on special pallets, so a delivery charge applies whatever the order value. It's calculated at checkout.

Minimum order: 5 m² for field tiles.

Shipping policy Refund policy

FAQs

How much should I order?

Measure the area in m² and add 10% for cuts, breakages and spares for future repairs (15% for herringbone or diagonal layouts). Tiles are sold in full boxes only. Use the box calculator next to the price: it adds the 10%, rounds up to whole boxes and fills in the quantity for you.

What does rectified mean?

Rectified tiles are ground to an exact size after firing, giving straight, sharp edges. That allows tight grout joints of around 2–3 mm. Non-rectified (natural-edge) tiles need a slightly wider joint.

What do R10, R11 and A+B mean?

R ratings (DIN 51130) measure slip resistance in shoes: R10 suits most indoor floors, and R11 suits outdoor areas and wet, heavy-use spaces. A+B (DIN 51097) is the barefoot wet rating, used for showers and pool surrounds. The rating for your chosen finish is shown under Technical information.

What does V3 shade variation mean?

V3 means moderate variation in shade and pattern from tile to tile, as you'd see in natural stone. Draw tiles from several boxes as you lay, so the variation spreads evenly across the floor.

How long does delivery take?

COEM tiles are shipped from Italy, typically within 2–4 weeks. Delivery is free on orders of £750 and over; under that, pallet delivery is calculated at checkout. Large-format tiles and slabs (90 × 90 cm and above) always carry a delivery charge, calculated at checkout. Call us on 01782 617517 if you need a firm date.