Microforce Rustik Textured Microcement 15 kg (60 Colours)

Microforce Rustik gives walls, floors and façades a natural, softly textured finish with the character of hand-worked stone. A two-component microcement of special cement, selected aggregates, resins and pigments, it is mixed 2:1 with Microforce Liquido and applied by trowel.

The 2–3 mm system bonds to almost any sound surface, including existing tiles, so bathrooms, stairs, floors and exterior walls can be transformed without demolition. Fully waterproof yet breathable, it is available in 60 colours.

Supplied by Microstone UK, Newcastle-under-Lyme. Contact us for stock and lead time.

How it's applied

1. Prepare — substrate sound, fully cured (≥28 days) and below 4% moisture. Open the pore.
2. Prime — 1–2 coats of Primer 2C, or Hidroprimer on walls. Use Epoxim Plus 3C where there is rising damp.
3. Regularise — a first coat of Microforce Ground if needed.
4. Mix — 2 parts powder to 1 part Microforce Liquido. Mix for 5 minutes at low speed and rest for 2 minutes. Never add water.
5. Apply — trowel coats of 0.5 mm maximum, sanding and vacuuming between coats.
6. Seal — once fully dry (below 4% moisture), seal with Aquamax.

Outdoors, do not apply in direct sun, wind, rain or frost. Not resistant to acids, aggressive cleaners or bleach. Manufacturer data is indicative — always test on site.