Microstone
Primer 2C Fast
Fast-Drying 100% Solids Epoxy Primer
Tell us the finish you want and we'll reply the same working day with a price and lead time.
- Free deliveryon orders over £500
- Price matchguarantee
- Expert adviceavailable
Product description
Primer 2C Fast is a fast-drying, 100% solids epoxy primer for concrete floors, intermediate layers in glass-fibre laminates and multi-layer resin systems. With high chemical resistance and strong anchorage, it suits food, chemical and industrial environments as well as getting decorative floor systems moving faster.
Supplied by Microstone UK, Newcastle-under-Lyme. Enquire for price, stock and lead time.
How it's applied
Apply only to completely dry, clean substrates; cement bases fully cured (≥28 days) and below 4% moisture. Open smooth, non-absorbent surfaces mechanically and vacuum thoroughly. Mix A+B at low speed and use within about 15 minutes. Allow 6–24 hours between coats. Ventilate well; avoid contact with eyes and skin. Do not apply above 85% RH, below 10°C, or on damp floors or rising damp.
Key features
- Fast-drying — touch dry in 3 hours
- 100% solids epoxy
- Adhesion > 1.5 N/mm² (concrete failure)
- High chemical resistance
- Protects heavy-traffic floors from erosion
- Interior use
Technical information
- Brand
- Microforce / Innidisa (supplied by Microstone UK)
- Product type
- Two-component fast-drying epoxy primer
- Coverage
- Not stated by the manufacturer — ask us for a quantity
- Mixing ratio
- 2.6A : 1B by weight (2.5A : 1B by volume)
- Pot life
- Approx. 15–20 minutes
- Touch dry
- 3 hours
- Between coats
- 6–24 hours
- Tensile adhesion
- > 1.5 N/mm²
- Compressive strength (epoxy mortar, 7 days)
- ≥ 50 MPa
- Finish
- Gloss
- Density
- 1.09 ± 0.05 kg/l
- Application temperature
- 15–25°C
- Use
- Interior
- Product code
- A+B kit MF-PRIMER2C-FAST
Downloads
- Product data sheetPDF – Manufacturer product data sheet Download