Skip to product information
Microstone
Primer 2C
100% Solids Epoxy Primer for Concrete & Tile | 4 kg & 30 kg
£180.00
Taxes included.
Shipping calculated at checkout.
MF-PRIMER2C-4
- Free deliveryon orders over £500
- Price matchguarantee
- Expert adviceavailable
Product description
Primer 2C is a solvent-free, 100% solids two-component epoxy bonding primer for concrete and ceramic floors. It penetrates and hardens the substrate and gives outstanding adhesion on porous and low-porosity surfaces — including tiles — with up to 7% moisture at 1 cm depth. It is the standard primer under Microforce, Micrex and Microstone floor systems, usually broadcast with quartz.
Supplied by Microstone UK, Newcastle-under-Lyme. Contact us for stock and lead time.
How it's applied
- Prepare — remove cement laitance; clean and sand thoroughly; vacuum all dust.
- Mix — stir each component, pour B into A and mix with a low-speed mixer. Thin with Innidisa thinner up to 50% if required.
- Apply — 1–2 coats depending on substrate; recoat while still tacky (12–36 hours at 20°C).
Key features
- 100% solids, solvent-free epoxy
- Outstanding adhesion on porous and non-porous substrates
- Tolerates up to 7% substrate moisture at 1 cm
- Deep penetration and hardening of the substrate
- High chemical and mechanical resistance
- Simple 1:1 mix; 4 kg and 30 kg kits
Technical information
- Brand
- Microforce / Innidisa (supplied by Microstone UK)
- Product type
- Two-component 100% solids epoxy primer
- Coverage
- Not stated by the manufacturer — ask us for a quantity
- Packaging
- 4 kg and 30 kg kits (A+B)
- Mixing ratio
- 1A : 1B by weight and volume
- Pot life (20°C)
- 2 hours
- Touch dry
- 6 hours
- Recoat
- 12 hours (max 36 hours)
- Full strength
- 7 days
- Finish
- Smooth gloss
- Density (20°C)
- 1.06 ± 0.05 kg/l
- Application conditions
- 10–30°C; RH 30–70%
- Substrate moisture
- Up to 7% at 1 cm
- Product codes
- 4 kg kit MF-PRIMER2C-4
- 30 kg kit MF-PRIMER2C-30
Downloads
- Product data sheetPDF – Manufacturer product data sheet Download