{"title":"Microcement Base Coats \u0026 Screeds","description":"\u003cp\u003eBase coats, levelling mortars and screeds that sit under a Microstone by Microforce finish: RTU Base, Micrex Base, Micrex Iron, Innifloor self-levelling screed and Pool Base waterproof mortar.\u003c\/p\u003e","products":[{"product_id":"microforce-rtu-base-waterproof","title":"Microforce RTU Base 100% Waterproof | Ready-to-Use Levelling Microcement 12 kg","description":"\u003cp\u003eMicroforce RTU Base is the ready-to-use, 100% waterproof base coat of the RTU system. Open the pot and apply — there are no powders or resins to mix. It levels uneven walls and fills the grout lines of existing tiles, creating a flat, sound surface for the RTU Thin or RTU Rustik finish.\u003c\/p\u003e\u003cp\u003eFor floors, two coats of RTU Base with reinforcing mesh are always recommended before the finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSupplied by Microstone UK, Newcastle-under-Lyme. Contact us for stock and lead time.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCovers approx. 12 m² per coat per 12 kg pot\u003c\/li\u003e\n\u003cli\u003eReady to use — open the pot and apply\u003c\/li\u003e\n\u003cli\u003e100% waterproof\u003c\/li\u003e\n\u003cli\u003eLevels walls and fills tile grout lines\u003c\/li\u003e\n\u003cli\u003eHigh adhesion and high mechanical resistance\u003c\/li\u003e\n\u003cli\u003eFlexible, not self-cracking\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it's applied\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare\u003c\/strong\u003e — clean, sand and open the pore. Any pre-treatment should be done 14–21 days beforehand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime\u003c\/strong\u003e — Hidroprimer on absorbent surfaces (plaster, plasterboard, cement); allow 2–48 hours. Primer 2C with quartz on low-porosity surfaces; Epoxim Plus 3C on damp substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill joints\u003c\/strong\u003e — on tiles, marble or terrazzo, fill the grout lines with RTU Base and leave 4–6 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel\u003c\/strong\u003e — apply 1–2 coats with a rigid trowel, 4 hours between coats, sanding with 80 grit and removing dust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e — apply RTU Thin or RTU Rustik.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eManufacturer data is indicative — always test on site before full application.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specification\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMicroforce (supplied by Microstone UK)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eReady-to-use waterproof base microcement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApprox. 12 m² per coat per 12 kg pot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAppearance\u003c\/th\u003e\n\u003ctd\u003ePaste\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDensity\u003c\/th\u003e\n\u003ctd\u003e1.6 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrain size\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 0.6 mm (max 1 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness per coat\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 1.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConsumption\u003c\/th\u003e\n\u003ctd\u003eApprox. 1 kg\/m² per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasion resistance (Taber)\u003c\/th\u003e\n\u003ctd\u003e0.200 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface hardness (Shore D)\u003c\/th\u003e\n\u003ctd\u003e65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e12 kg pot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTool cleaning\u003c\/th\u003e\n\u003ctd\u003eWater, before the product hardens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e8–28°C in the sealed original pot, away from heat and sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e6 months from production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Microstone","offers":[{"title":"12 kg pot","offer_id":54949306958170,"sku":"MF-RTU-BASE-12","price":164.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/8666\/4282\/files\/microforce-rtu-base-waterproof-microstone-pack.jpg?v=1791638167"},{"product_id":"microstone-pool-base","title":"Microstone Pool Base | Elastic Waterproof Mortar for Pools \u0026 Tanks","description":"\u003cp\u003eMicrostone Pool Base is a two-component, elastic waterproof mortar for swimming pools, water tanks and walls exposed to water. Applied in three thin coats with mesh, it forms the waterproof base that is then covered by the Microstone or Microforce pool finish.\u003c\/p\u003e\u003cp\u003eSold as two components: the 25 kg powder (Component A) and the 20 L liquid (Component B). Each 25 kg bag is mixed with 9 L of Component B, so one 20 L drum serves two bags.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSupplied by Microstone UK, Newcastle-under-Lyme. Contact us for stock and lead time.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWaterproofs pool bases and water tanks\u003c\/li\u003e\n\u003cli\u003eElastic, crack-bridging — Class A5\u003c\/li\u003e\n\u003cli\u003eProtects walls exposed to water\u003c\/li\u003e\n\u003cli\u003eBonds to concrete, precast concrete, render and ceramics\u003c\/li\u003e\n\u003cli\u003eA1 euroclass fire rating\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it's applied\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare\u003c\/strong\u003e — flat, sound, clean substrate; cement bases fully cured (≥28 days). Repair defects with Innirepair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix\u003c\/strong\u003e — pour 9 L of Component B and slowly add the 25 kg powder until smooth and lump-free. Rest 5 minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e — three coats at minimum thickness with a steel trowel, mesh embedded in the middle of the coating. 4–5 hours between coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e — cover with the final pool finish; wait at least 28 days before filling.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eAvoid application with risk of rain, frost, strong wind or direct sun. For tanks in permanent contact with water, allow to dry fully (\u0026lt;4% moisture) and wash with hot water before use.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specification\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMicroforce (supplied by Microstone UK)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eTwo-component elastic waterproof mortar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eUp to approx. 6.8 m² per 25 kg bag mixed with 9 L of Component B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDosage\u003c\/th\u003e\n\u003ctd\u003e25 kg Component A + 9 L Component B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConsumption\u003c\/th\u003e\n\u003ctd\u003e1.5–2 kg\/m², depending on substrate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e2 mm per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003e±60 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTime between coats\u003c\/th\u003e\n\u003ctd\u003e4–5 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOvercoating\u003c\/th\u003e\n\u003ctd\u003e≥ 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWait before filling\u003c\/th\u003e\n\u003ctd\u003e≥ 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDirect tensile adhesion\u003c\/th\u003e\n\u003ctd\u003e±1 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCrack resistance\u003c\/th\u003e\n\u003ctd\u003eClass A5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePermeability index\u003c\/th\u003e\n\u003ctd\u003e0.03 kg\/m²·h⁰·⁵\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFire rating\u003c\/th\u003e\n\u003ctd\u003eA1 euroclass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eComponent A 25 kg bag · Component B 20 L drum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e1 year, sealed and protected from weather and humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Microstone","offers":[{"title":"Component A – 25 kg powder","offer_id":54949512773978,"sku":"MS-POOLBASE-A-25","price":190.0,"currency_code":"GBP","in_stock":true},{"title":"Component B – 20 L liquid","offer_id":54949512806746,"sku":"MS-POOLBASE-B-20L","price":360.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/8666\/4282\/files\/microstone-pool-base-microstone-pack.jpg?v=1791638162"},{"product_id":"micrex-base","title":"Micrex Base | Water-Based Decorative \u0026 Industrial Mortar 25 kg","description":"\u003cp\u003eMicrex Base is a three-component, water-based decorative and industrial mortar. It is the base coat of the Micrex system and can also be used alone as a trowelled-effect coloured coating for floors and walls, inside or out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSupplied by Microstone UK, Newcastle-under-Lyme. Contact us for stock and lead time.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBase coat for Micrex and Micrex Rustik\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion to resin coatings (\u0026gt; 2 N\/mm² to concrete)\u003c\/li\u003e\n\u003cli\u003eExcellent mechanical and abrasion resistance\u003c\/li\u003e\n\u003cli\u003eExcellent UV and weather resistance\u003c\/li\u003e\n\u003cli\u003eInterior and exterior floors and walls\u003c\/li\u003e\n\u003cli\u003eTintable with 3–10% water-based colourant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it's applied\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare\u003c\/strong\u003e — concrete sound, dry, level and absorbent, cured \u0026gt;28 days, minimum 25 N\/mm² compressive and 1.5 N\/mm² tensile strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix\u003c\/strong\u003e — pour B into A, mix at low speed for at least 1 minute, then add C and remix.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e — steel or rubber trowel at approx. 0.3–0.5 kg\/m² per coat.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eYellow, orange and red shades may need extra coats or a white base coat. Use material from the same batch where possible.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specification\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMicroforce (supplied by Microstone UK)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eThree-component water-based mortar (A+B+C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApprox. 25–83 m² per coat per 25 kg pack, depending on aggregate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e25 kg pack (A+B+C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMixing ratio\u003c\/th\u003e\n\u003ctd\u003eA 100 : B 50 : C 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConsumption\u003c\/th\u003e\n\u003ctd\u003e0.3–1 kg\/m² per coat, depending on aggregate size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life (25°C)\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry (25°C)\u003c\/th\u003e\n\u003ctd\u003e8–10 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFoot traffic\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 24 hours (25°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAdhesion to concrete\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 2 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDensity\u003c\/th\u003e\n\u003ctd\u003e1.80 ± 0.05 g\/ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e10–30°C, RH \u0026lt; 75%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior and exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTool cleaning\u003c\/th\u003e\n\u003ctd\u003eWater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eA and B 12 months; C 6 months; 5–35°C, dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Microstone","offers":[{"title":"25 kg pack (A+B+C)","offer_id":54949311447386,"sku":"MF-MICREX-BASE-25","price":619.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/8666\/4282\/files\/micrex-base-microstone-pack.jpg?v=1791638163"},{"product_id":"micrex-iron-epoxy-floor-mortar","title":"Micrex Iron | Heavy-Duty Epoxy Floor Mortar 22.5 kg","description":"\u003cp\u003eMicrex Iron is a three-component, water-based epoxy decorative mortar built for floors that see heavy traffic. Selected high-strength aggregates give a highly wear-resistant surface even at minimal thickness, with a refined mineral texture — ideal for shops, showrooms, warehouses and busy commercial interiors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSupplied by Microstone UK, Newcastle-under-Lyme. Contact us for stock and lead time.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCovers approx. 22–45 m² per coat per 22.5 kg pack\u003c\/li\u003e\n\u003cli\u003eVery high abrasion resistance, even at minimal thickness\u003c\/li\u003e\n\u003cli\u003eFor high-traffic decorative floors — retail, warehouse, commercial\u003c\/li\u003e\n\u003cli\u003eCompressive strength \u0026gt; 30 N\/mm²; flexural \u0026gt; 20 N\/mm²\u003c\/li\u003e\n\u003cli\u003eFoot traffic after 8 hours (25°C)\u003c\/li\u003e\n\u003cli\u003eWater-based epoxy — tools clean with water\u003c\/li\u003e\n\u003cli\u003eInterior use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it's applied\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare\u003c\/strong\u003e — grind, shot-blast or pressure-wash the concrete; grind tiled floors hard and repair loose tiles with R4 repair mortar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime\u003c\/strong\u003e — one coat of Primer 3C broadcast with 0.1–0.5 mm quartz; vacuum loose quartz once dry. Treat oily surfaces with Primer 2C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix\u003c\/strong\u003e — mix A+B for at least 2 minutes at low speed, then gradually add C and mix for about 1 minute.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e — spread quickly with a steel trowel at 0.5–1 kg\/m² per coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e — seal with Aquamax at approx. 0.05–0.1 kg\/m².\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eTechnical specification\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMicroforce (supplied by Microstone UK)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eThree-component water-based epoxy mortar (A+B+C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApprox. 22–45 m² per coat per 22.5 kg pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e22.5 kg pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMixing ratio\u003c\/th\u003e\n\u003ctd\u003eA 45 : B 30 : C 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConsumption\u003c\/th\u003e\n\u003ctd\u003e0.5–1 kg\/m² per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life (25°C)\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 20 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry (25°C)\u003c\/th\u003e\n\u003ctd\u003e8–10 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFoot traffic\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 8 hours (25°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressive strength\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 30 N\/mm² (7 days)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlexural strength\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 20 N\/mm² (7 days)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDensity\u003c\/th\u003e\n\u003ctd\u003e2.5 ± 0.1 g\/ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication temperature\u003c\/th\u003e\n\u003ctd\u003e10–30°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eCement grey; see colour chart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior high-traffic floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e1 year, 5–35°C, sealed (Component B is sensitive to air moisture)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Microstone","offers":[{"title":"22.5 kg pack","offer_id":54949311512922,"sku":"MF-MICREX-IRON-22","price":781.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/8666\/4282\/files\/micrex-iron-epoxy-floor-mortar-microstone-pack.jpg?v=1791638164"}],"url":"https:\/\/homeofclay.com\/collections\/microcement-base-coats-screeds.oembed","provider":"Home of Clay","version":"1.0","type":"link"}